Frogmill water level
River gauge, River Hamble, Hampshire, United Kingdom
Right now
Within the normal range
Water level
History
What this means
Water levels are unremarkable at Frogmill, where the gauge shows 0.07 m.
The usual range here runs from 0.03 m to 0.92 m.
The level has held steady over the past 24 hours. The 30-day range is 0.06 m – 0.08 m.
Autumn rain usually starts to lift rivers again after the summer low.
Compared with the normal range the agency publishes for this gauge. How to read levels
Key numbers
- Normal range
- 0.03 m – 0.92 m
- Highest on record
- 1.63 mJuly 12, 2021
- Lowest on record
- 0.01 mJune 23, 1982
For anglers and canoeists
This is an ordinary level for the river: most put-ins, beats and weirs behave as they usually do.
Many angling and canoe clubs check gauges like this one before heading out.
About the River Hamble
The River Hamble in south Hampshire, England, rises near Bishop's Waltham and flows for 10.1 km (6.3 mi) through Botley, Bursledon, and Lower Swanwick before entering Southampton Water between Hamble Common and Warsash.
Text and image from Wikipedia and Wikimedia Commons, licensed under CC BY-SA.
Weather at the gauge
Rain in the last 3 days: 5.9 mm. Rain that falls upstream can take hours or days to show up at a river gauge.
Forecast: Open-Meteo
Map
Other gauges on the River Hamble
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| Hobb LaneRiver gauge, River Hamble | 20.58 m | Very low | −0.01 m | 3.4 km |
| North PondRiver gauge, River Hamble | 34.31 m | Very low | ±0 | 4.2 km |
Nearby gauges
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| WickhamRiver gauge, River Meon | 18.59 m | Very low | −0.01 m | 6.1 km |
| MislingfordRiver gauge, River Meon | 0.21 m | Normal | −0.01 m | 6.7 km |
| BishopstokeRiver gauge, River Itchen | 0.54 m | Normal | −0.04 m | 7.0 km |
| Stoke LockRiver gauge, River Itchen | 12.89 m | Normal | −0.03 m | 7.3 km |
| Riverside ParkRiver gauge, River Itchen | 1.29 m | Very low | −0.03 m | 7.8 km |
| Stoneham LaneRiver gauge, Monks Brook | 0.11 m | Normal | ±0 | 8.3 km |
| Highbridge weirRiver gauge, River Itchen | 0.27 m | Very low | −0.01 m | 8.5 km |
| Allbrook weirRiver gauge, River Itchen | 0.30 m | Normal | −0.02 m | 8.7 km |
Questions and answers
What is the typical range for the River Hamble at Frogmill?
The Environment Agency gives a typical range of 0.03 m to 0.92 m for this gauge.
Is the river level the same as the depth of the water?
No. The reading is measured from a fixed zero mark at the gauge, so 0.07 m on the gauge does not mean the water is that deep.
What is the water level of Frogmill today?
On 17 Oct 2026, 17:45 BST, the water level was 0.07 m. Steady over the last 24 hours.
Is Frogmill rising or falling?
Steady over the last 24 hours.
Is the level of Frogmill normal?
Within the normal range. Compared with the normal range the agency publishes for this gauge.
What is the highest water level ever recorded at Frogmill?
The highest level on record is 1.63 m on July 12, 2021. The lowest is 0.01 m on June 23, 1982.
How often is this data updated?
The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.
For specialists
Station codes, datum, parameters, data quality and downloads
- Operator
- Environment Agency
- Station code
ea:E12020(Agency page)- Coordinates
50.93135, -1.25737(WGS84)- Vertical datum
- station datum
- Update interval
- every 15 minutes
- Licence
- Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0
Published series
| Parameter | Last value | Time (UTC) | Quality |
|---|---|---|---|
| Surface elevation | – | – | – |
| Water level | 0.07 m | 2026-10-17 16:45 | Provisional |
Download
Embed this gauge
Add a live card for this gauge to your website. It updates on its own and links back here.
How to cite
Environment Agency: Frogmill (ea:E12020). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/hampshire/frogmill
How we check values
Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.
Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer