Nivelmap
EN

Bekesbourne water level

River gauge, Nailbourne, Kent, United Kingdom

Directions

Right now

Within the normal range

Water level

0.76m Steady over the last 24 hours

0 1 2 Highest onrecord 2.08 m Lowest on record 0.00 m

History

History
0.770.77mOct 10Oct 12Oct 14Oct 16Oct 170.770.77mOct 10Oct 14Oct 17
0.760.77mSep 17Sep 25Oct 2Oct 10Oct 170.760.77mSep 18Oct 2Oct 17
Water level Top of normal rangeBottom of normal range

What this means

The gauge at Bekesbourne reads 0.76 m, a normal level.

The usual range here runs from 0.04 m to 1.42 m.

The level has held steady over the past 24 hours. Over the past 30 days it has moved between 0.76 m and 0.78 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.04 m – 1.42 m
Lowest and highest in 30 days
0.76 m – 0.78 m
Highest on record
2.08 mFebruary 15, 2014
Lowest on record
0.00 mJanuary 24, 2009

On the river at Bekesbourne

A level in the typical range is usually good news for both anglers and canoeists, but conditions can change quickly after rain in the hills.

Flood warnings for the area come from the Environment Agency.

Weather at the gauge

Rain in the last 3 days: 1.6 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

17 Sat 14° 8° 0.3 mm, 94% Wind 25 km/h
18 Sun 12° 8° 24 mm, 100% Wind 28 km/h
19 Mon 14° 7° – Wind 16 km/h
20 Tue 14° 12° 0.4 mm, 42% Wind 17 km/h
21 Wed 13° 11° 13 mm, 47% Wind 17 km/h
22 Thu 14° 6° 4.8 mm, 49% Wind 23 km/h
23 Fri 13° 8° 17 mm, 79% Wind 49 km/h

Forecast: Open-Meteo

Sunrise 07:22 AM Sunset 06:00 PM Daylight 10 hr, 38 min First quarter 44%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
LittlebourneRiver gauge, Little Stour 0.00 m Very low ±0 2.4 km
Wingham RoadGroundwater well 4.02 m Low −0.01 m 3.9 km
Fordwich River LevelRiver gauge, Great Stour 1.41 m Normal −0.05 m 4.4 km
Vauxhall BridgeRiver gauge, Great Stour 0.28 m Normal +0.01 m 5.1 km
West Gate GardensRiver gauge, Great Stour 0.21 m Low +0.02 m 5.6 km
Horton weirRiver gauge, Great Stour 0.16 m Normal +0.01 m 8.1 km
North ElhamGroundwater well 53.31 m Normal −0.09 m 11 km
Upper Petham BourneGroundwater well 62.02 m Normal −0.07 m 11 km

Questions and answers

What is the typical range for the Nailbourne at Bekesbourne?

The Environment Agency gives a typical range of 0.04 m to 1.42 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.76 m on the gauge does not mean the water is that deep.

What is the water level of Bekesbourne today?

On 17 Oct 2026, 22:15 BST, the water level was 0.76 m. Steady over the last 24 hours.

Is Bekesbourne rising or falling?

Steady over the last 24 hours. Steady over the last 7 days.

Is the level of Bekesbourne normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Bekesbourne?

The highest level on record is 2.08 m on February 15, 2014. The lowest is 0.00 m on January 24, 2009.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:E4060 (Agency page)
Coordinates
51.25814, 1.14593 (WGS84)
Vertical datum
station datum
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.76 m 2026-10-17 21:15 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Bekesbourne (ea:E4060). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/kent/bekesbourne

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.