Nivelmap
EN

Fitzwilliam Sluice Greatford Wits water level

River gauge, Lincolnshire, United Kingdom

Directions

Right now

Latest reading

Surface elevation

13.00m Steady over the last 24 hours

11 13 14 15

History

History
12.9913.00mOct 13Oct 15Oct 16Oct 18Oct 2012.9913.00mOct 13Oct 16Oct 20
11.512.012.513.0mSep 20Sep 27Oct 5Oct 12Oct 2011.512.012.513.0mSep 20Oct 5Oct 20
Surface elevation

What this means

Fitzwilliam Sluice Greatford Wits reads 13.00 m as of 20 Oct 2026, 09:45 BST. The agency publishes no normal range or warning level for this river yet, so there is nothing to judge the number against.

The level has held steady over the past 24 hours. In the last month it has stayed between 11.61 m and 13.01 m.

Over the past seven days the change adds up to 0.00 m.

The agency publishes no normal range for this gauge yet, so we show the trend only. How to read levels

Key numbers

Lowest and highest in 30 days
11.61 m – 13.01 m
Lowest and highest in 12 months
12.41 m – 13.00 m

Fishing and paddling

Watch the direction of travel. A rising river after rain behaves very differently from one that is dropping and clearing.

Flood alerts and warnings come from the Environment Agency.

Weather at the gauge

Rain in the last 3 days: 9.1 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

20 Tue 13° 11° 3.0 mm, 100% Wind 18 km/h
21 Wed 12° 8° 14 mm, 63% Wind 43 km/h
22 Thu 12° 6° 0.9 mm, 49% Wind 21 km/h
23 Fri 12° 8° 23 mm, 82% Wind 37 km/h
24 Sat 12° 8° 1.3 mm, 78% Wind 34 km/h
25 Sun 17° 9° 2.9 mm, 47% Wind 22 km/h
26 Mon 17° 10° 4.6 mm, 34% Wind 30 km/h

Forecast: Open-Meteo

Sunrise 07:36 AM Sunset 05:58 PM Daylight 10 hr, 21 min First quarter 67%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Shillingthorpe GS WitsRiver gauge 0.05 m Normal ±0 1.1 km
Kates BridgeRiver gauge, River Glen 0.05 m Low ±0 3.9 km
TallingtonRiver gauge, River Welland 0.40 m Normal ±0 4.0 km
Hudds MillRiver gauge, River Welland 0.13 m Normal −0.01 m 5.9 km
Market DeepingRiver gauge, River Welland 0.09 m Normal −0.02 m 6.7 km
Deeping St JamesRiver gauge, River Welland 0.94 m Low −0.01 m 8.4 km
Little BythamRiver gauge, River Tham 0.03 m Normal ±0 9.4 km
Castle BythamRiver gauge, River Tham 0.14 m Normal −0.12 m 12 km

Questions and answers

Is Fitzwilliam Sluice Greatford Wits really 13.00 m deep?

No. 13.00 m is the height of the water surface above sea level (or the agency's vertical datum), not the depth of the water.

What is the water level of Fitzwilliam Sluice Greatford Wits today?

On 20 Oct 2026, 09:45 BST, the surface elevation was 13.00 m. Steady over the last 24 hours.

Is Fitzwilliam Sluice Greatford Wits rising or falling?

Steady over the last 24 hours. Steady over the last 7 days.

Is the level of Fitzwilliam Sluice Greatford Wits normal?

The agency publishes no normal range for this gauge yet, so we show the trend only.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the Environment Agency, the official operator of this gauge, and are published under the Open Government Licence v3.0. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:E2590
Coordinates
52.69167, -0.39802 (WGS84)
Vertical datum
ODN
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Surface elevation 13.00 m 2026-10-20 08:45 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Fitzwilliam Sluice Greatford Wits (ea:E2590). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/lincolnshire/fitzwilliam-sluice-greatford-wits

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.