Nivelmap
EN

Shotesham water level

River gauge, River Tas, Norfolk, United Kingdom

Directions

Right now

Below the normal range

Water level

0.16m Steady over the last 24 hours

0.0 0.5 1.0 1.5 Highest onrecord 1.52 m Lowest on record 0.12 m

History

History
0.160.16mOct 16Oct 16Oct 16Oct 17Oct 17Bottom of normal range0.160.16mOct 16Oct 16Oct 17Bottom of normal range
Water level Top of normal rangeBottom of normal range

What this means

At 0.16 m, the River Tas at Shotesham is below normal.

The usual range here runs from 0.16 m to 0.85 m.

The level has held steady over the past 24 hours. Without real rain upstream, that is unlikely to change quickly. Over the past 30 days it has moved between 0.16 m and 0.17 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.16 m – 0.85 m
Highest on record
1.52 mDecember 24, 2020
Lowest on record
0.12 mOctober 24, 1985

On the river at Shotesham

Low, clear water makes fish wary, and anglers often do better early and late in the day. For canoeists, shallow riffles mean scraped hulls and the odd portage.

Flood warnings for the area come from the Environment Agency.

Weather at the gauge

Rain in the last 3 days: 3.2 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

17 Sat 13° 8° 2.2 mm, 80% Wind 21 km/h
18 Sun 12° 8° 5.6 mm, 78% Wind 26 km/h
19 Mon 14° 10° 2.1 mm, 58% Wind 14 km/h
20 Tue 15° 13° 0.9 mm, 28% Wind 18 km/h
21 Wed 14° 8° 5.9 mm, 45% Wind 19 km/h
22 Thu 12° 7° 4.1 mm, 29% Wind 37 km/h
23 Fri 12° 6° 2.9 mm, 52% Wind 39 km/h

Forecast: Open-Meteo

Sunrise 07:24 AM Sunset 05:58 PM Daylight 10 hr, 34 min First quarter 40%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
ColneyRiver gauge, River Yare 0.13 m Low +0.01 m 9.8 km
Rockland St MaryTidal gauge, River Yare 0.37 m Normal +0.03 m 12 km
WymondhamRiver gauge, River Tiffey 1.15 m Low +0.02 m 12 km
BrundallTidal gauge, River Yare 0.66 m Normal −0.15 m 13 km
Costessey MillRiver gauge, River Wensum 0.25 m Normal ±0 14 km
CantleyTidal gauge, River Yare 0.58 m Normal −0.15 m 16 km
SpixworthRiver gauge, Spixworth Beck 0.09 m Low ±0 17 km
NeedhamRiver gauge, River Waveney 0.22 m Low ±0 18 km

Questions and answers

What is the typical range for the River Tas at Shotesham?

The Environment Agency gives a typical range of 0.16 m to 0.85 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.16 m on the gauge does not mean the water is that deep.

What is the water level of Shotesham today?

On 17 Oct 2026, 14:30 BST, the water level was 0.16 m. Steady over the last 24 hours.

Is Shotesham rising or falling?

Steady over the last 24 hours.

Is the level of Shotesham normal?

Below the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Shotesham?

The highest level on record is 1.52 m on December 24, 2020. The lowest is 0.12 m on October 24, 1985.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:E23265 (Agency page)
Coordinates
52.54683, 1.28135 (WGS84)
Vertical datum
station datum
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.16 m 2026-10-17 13:30 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Shotesham (ea:E23265). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/norfolk/shotesham

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.