Nivelmap
EN

Lower Ringstead Sluice Automation Wits water level

River gauge, Northamptonshire, United Kingdom

Directions

Right now

Latest reading

Surface elevation

32.13m Up 0.04 m over the last 24 hours

30 35

History

History
32.0832.1032.13mOct 12Oct 14Oct 15Oct 17Oct 1932.0832.1032.13mOct 12Oct 15Oct 19
32.0532.1032.15mSep 19Sep 26Oct 4Oct 11Oct 1932.0532.1032.15mSep 19Oct 4Oct 19
Surface elevation

What this means

Lower Ringstead Sluice Automation Wits reads 32.13 m as of 19 Oct 2026, 10:30 BST. There is no published reference for this river yet, so we can't say whether that is high or low for the season.

It has risen 0.04 m over the past 24 hours. In the last month it has stayed between 32.03 m and 32.18 m.

Over the past seven days the change adds up to +0.05 m.

The agency publishes no normal range for this gauge yet, so we show the trend only. How to read levels

Key numbers

Lowest and highest in 30 days
32.03 m – 32.18 m
Lowest and highest in 12 months
32.04 m – 32.15 m

Fishing and paddling

Watch the direction of travel. A rising river after rain behaves very differently from one that is dropping and clearing.

Flood alerts and warnings come from the Environment Agency.

Weather at the gauge

Rain in the last 3 days: 4.9 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

19 Mon 13° 9° 7.2 mm, 100% Wind 13 km/h
20 Tue 12° 10° 11 mm, 89% Wind 15 km/h
21 Wed 10° 7° 13 mm, 45% Wind 25 km/h
22 Thu 12° 5° 1.3 mm, 78% Wind 21 km/h
23 Fri 13° 8° 16 mm, 84% Wind 37 km/h
24 Sat 11° 8° 2.4 mm, 63% Wind 35 km/h
25 Sun 17° 10° 0.6 mm, 62% Wind 27 km/h

Forecast: Open-Meteo

Sunrise 07:35 AM Sunset 06:01 PM Daylight 10 hr, 26 min First quarter 58%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Islip SluiceRiver gauge, River Nene 0.65 m Normal −0.03 m 4.3 km
Old Mill Bridge, LowickRiver gauge, Harpers Brook 0.14 m Normal +0.02 m 4.8 km
HarrowdenRiver gauge, River Ise 0.19 m Normal +0.06 m 8.4 km
LilfordRiver gauge, River Nene 0.38 m Normal +0.01 m 10 km
Slade BrookRiver gauge, River Ise 0.14 m Normal +0.02 m 10 km
CovingtonRiver gauge, River Kym 0.12 m Normal +0.01 m 10 km
BrigstockRiver gauge, Harpers Brook 0.09 m Normal +0.10 m 11 km
Barford BridgeRiver gauge, River Ise 0.01 m Low ±0 14 km

Questions and answers

Is Lower Ringstead Sluice Automation Wits really 32.13 m deep?

No. 32.13 m is the height of the water surface above sea level (or the agency's vertical datum), not the depth of the water.

What is the water level of Lower Ringstead Sluice Automation Wits today?

On 19 Oct 2026, 10:30 BST, the surface elevation was 32.13 m. Up 0.04 m over the last 24 hours.

Is Lower Ringstead Sluice Automation Wits rising or falling?

Up 0.04 m over the last 24 hours. Up 0.05 m over the last 7 days.

Is the level of Lower Ringstead Sluice Automation Wits normal?

The agency publishes no normal range for this gauge yet, so we show the trend only.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the Environment Agency, the official operator of this gauge, and are published under the Open Government Licence v3.0. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:E4453
Coordinates
52.36629, -0.57148 (WGS84)
Vertical datum
ODN
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Surface elevation 32.13 m 2026-10-19 09:30 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Lower Ringstead Sluice Automation Wits (ea:E4453). Accessed October 19, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/northamptonshire/lower-ringstead-sluice-automation-wits

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.