Nivelmap
EN

Great Easton Flood Storage Reservoir water level

River gauge, River Welland, Rutland, United Kingdom

Directions

Right now

Within the normal range

Water level

0.64m Up 0.33 m over the last 24 hours

0 3 5 Highest onrecord 5.04 m Lowest on record 0.00 m

History

History
0.40.6mOct 14Oct 15Oct 17Oct 19Oct 20Bottom of normal range0.40.6mOct 14Oct 17Oct 20Bottom of normal range
0.20.40.6mSep 21Sep 28Oct 5Oct 13Oct 20Bottom of normal range0.20.40.6mSep 21Oct 5Oct 20Bottom of normal range
Water level Top of normal rangeBottom of normal range

What this means

The gauge at Great Easton Flood Storage Reservoir reads 0.64 m, a normal level.

The usual range here runs from 0.24 m to 1.79 m.

The water is rising: up 0.33 m over the past 24 hours. Over the past 30 days it has moved between 0.23 m and 0.68 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.24 m – 1.79 m
Lowest and highest in 30 days
0.23 m – 0.68 m
Lowest and highest in 12 months
0.28 m – 0.35 m
Highest on record
5.04 mDecember 23, 2020
Lowest on record
0.00 mJuly 7, 2003

On the river at Great Easton Flood Storage Reservoir

A level in the typical range is usually good news for both anglers and canoeists, but conditions can change quickly after rain in the hills.

Flood warnings for the area come from the Environment Agency.

About the River Welland

River Welland

The River Welland is a lowland river in the east of England, some 65 miles (105 km) long. It drains part of the Midlands eastwards to The Wash. The river rises in the Hothorpe Hills, at Sibbertoft in Northamptonshire, then flows generally northeast to Market Harborough, Stamford and Spalding, to reach The Wash near Fosdyke. It is a major waterway across the part of the Fens called South Holland, and is one of the Fenland rivers that were laid out with washlands. There are two channels between widely spaced embankments with the intention that flood waters would have space in which to spread while the tide in the estuary prevented free egress. However, after the floods of 1947, new works such as the Coronation Channel were constructed to control flooding in Spalding, and the washlands are no longer used solely as pasture, but may be used for arable farming.

Read more on Wikipedia

Text and image from Wikipedia and Wikimedia Commons, licensed under CC BY-SA.

Weather at the gauge

Rain in the last 3 days: 1.6 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

19 Mon 13° 9° 8.8 mm, 100% Wind 20 km/h
20 Tue 12° 9° 7.6 mm, 95% Wind 18 km/h
21 Wed 10° 7° 12 mm, 65% Wind 32 km/h
22 Thu 11° 4° 2.3 mm, 51% Wind 21 km/h
23 Fri 11° 6° 29 mm, 87% Wind 44 km/h
24 Sat 10° 5° 8.2 mm, 58% Wind 31 km/h
25 Sun 17° 10° 3.8 mm, 49% Wind 38 km/h

Forecast: Open-Meteo

Sunrise 07:38 AM Sunset 05:59 PM Daylight 10 hr, 22 min Waxing gibbous 72%

Map

Other gauges on the River Welland

Gauge Level Compared with normal 24 hours Distance
AshleyRiver gauge, River Welland 0.07 m Normal +0.02 m 2.9 km
Market HarboroughRiver gauge, River Welland 0.17 m Normal +0.04 m 13 km
TixoverRiver gauge, River Welland 0.22 m Normal +0.03 m 14 km
Hudds MillRiver gauge, River Welland 0.13 m Normal +0.01 m 24 km
TallingtonRiver gauge, River Welland 0.40 m Normal ±0 29 km
Market DeepingRiver gauge, River Welland 0.09 m Normal +0.01 m 35 km
Deeping St JamesRiver gauge, River Welland 0.94 m Low +0.01 m 36 km

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
MedbourneRiver gauge, Medbourne Brook 0.03 m Normal ±0 4.6 km
Stockerston Road BridgeRiver gauge, River Eye Brook 0.06 m Normal ±0 5.1 km
Medbourne Flood Storage ReservoirRiver gauge, Medbourne Brook 0.27 m Normal ±0 5.3 km
Weldon Flood Storage ReservoirRiver gauge, Willow Brook 0.13 m Normal +0.04 m 8.4 km
Barford BridgeRiver gauge, River Ise 0.02 m Low −0.01 m 10 km
Litte Bowden Flood Storage ReservoirRiver gauge, River Jordan 0.27 m Normal +0.03 m 12 km
Little BowdenRiver gauge, River Jordan 0.04 m Normal ±0 12 km
BrigstockRiver gauge, Harpers Brook 0.04 m Low +0.02 m 13 km

Questions and answers

What is the typical range for the River Welland at Great Easton Flood Storage Reservoir?

The Environment Agency gives a typical range of 0.24 m to 1.79 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.64 m on the gauge does not mean the water is that deep.

What is the water level of Great Easton Flood Storage Reservoir today?

On 21 Oct 2026, 00:00 BST, the water level was 0.64 m. Up 0.33 m over the last 24 hours.

Is Great Easton Flood Storage Reservoir rising or falling?

Up 0.33 m over the last 24 hours. Up 0.36 m over the last 7 days.

Is the level of Great Easton Flood Storage Reservoir normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Great Easton Flood Storage Reservoir?

The highest level on record is 5.04 m on December 23, 2020. The lowest is 0.00 m on July 7, 2003.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:E4823 (Agency page)
Coordinates
52.52925, -0.75877 (WGS84)
Vertical datum
station datum
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.64 m 2026-10-20 23:00 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Great Easton Flood Storage Reservoir (ea:E4823). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/rutland/great-easton-flood-storage-reservoir

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.