Nivelmap
EN

Buildwas water level

River gauge, River Severn, Shropshire, United Kingdom

Directions

Right now

Normal for mid-October

Water level

0.60m Up 0.17 m over the last 24 hours

Flow
20.6 m³/s
0 3 5 8 Highest onrecord 7.04 m Lowest on record 0.42 m

History

History
123mOct 11Oct 12Oct 14Oct 16Oct 18Top of normal rangeBottom of normal range123mOct 11Oct 14Oct 18Top of normal rangeBottom of normal range
123mSep 18Sep 25Oct 3Oct 10Oct 18Top of normal rangeBottom of normal range123mSep 18Oct 3Oct 17Top of normal rangeBottom of normal range
24mOct 2025Jan 2026Apr 2026Jul 2026Oct 2026Top of normal rangeBottom of normal range24mOct 2025Apr 2026Oct 2026Top of normal rangeBottom of normal range
24mJanMarMayJulSepNov202624mJanAprJulOct2026

20252026

Water level Normal range (10–90 %) Top of normal rangeBottom of normal range

What this means

The gauge at Buildwas reads 0.60 m, a normal level for mid-October.

The median for mid-October is 0.61 m, based on 21 years of readings, so the river level is 0.01 m below typical. On the same day last year the reading was 0.55 m, a difference of +0.04 m.

The water is rising: up 0.17 m over the past 24 hours. Over the past 30 days it has moved between 0.34 m and 0.96 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with 21 years of daily readings for this time of year. How to read levels

Key numbers

Median for this date
0.61 m0.01 m below the median for this date
Normal for this date
0.43 m – 1.68 m8 years in 10 fall in this range (21 years of records)
Normal range
0.42 m – 3.40 m
Same day last year
0.55 m+0.04 m
Lowest and highest in 30 days
0.34 m – 0.96 m
Lowest and highest in 12 months
0.35 m – 4.06 m
Highest on record
7.04 mNovember 2, 2000
Lowest on record
0.42 mAugust 16, 1989

On the river at Buildwas

A level in the typical range is usually good news for both anglers and canoeists, but conditions can change quickly after rain in the hills.

Flood warnings for the area come from the Environment Agency.

About the River Severn

River Severn

The River Severn is the longest river in Great Britain, with a length of 220 miles (354 km). It is also the river with the most voluminous flow of water by far in all of England and Wales, with an average flow rate of 107 m3/s (3,800 cu ft/s) at Apperley, Gloucestershire. It rises in the Cambrian Mountains in mid Wales, at an altitude of 610 m (2,000 ft), on the Plynlimon massif, which lies close to the Ceredigion/Powys border near Llanidloes. The river then flows through Shropshire, Worcestershire and Gloucestershire. The county towns of Shrewsbury, Worcester and Gloucester lie on its course.

Read more on Wikipedia

Text and image from Wikipedia and Wikimedia Commons, licensed under CC BY-SA.

Weather at the gauge

The forecast is not available right now.

Sunrise 07:41 AM Sunset 06:11 PM Daylight 10 hr, 29 min First quarter 45%

Map

Other gauges on the River Severn

Gauge Level Compared with normal 24 hours Distance
BridgnorthRiver gauge, River Severn 0.60 m Normal +0.11 m 13 km
Welsh BridgeRiver gauge, River Severn 0.66 m Normal +0.08 m 18 km
MontfordRiver gauge, River Severn 0.97 m Normal −0.17 m 25 km
BewdleyRiver gauge, River Severn 0.40 m Normal +0.11 m 31 km
Cae HowelRiver gauge, River Severn 0.67 m Lowest on record −0.01 m 33 km
Crew GreenRiver gauge, River Severn 0.64 m Normal −0.31 m 34 km
Worcester (Barbourne)River gauge, River Severn 0.42 m Lowest on record −0.01 m 52 km
DiglisRiver gauge, River Severn 0.54 m Low −0.01 m 55 km
Kempsey Yacht ClubRiver gauge, River Severn 0.45 m Lowest on record −0.03 m 57 km
Saxons LodeRiver gauge, River Severn 0.00 m³/s No reference yet ±0 69 km
Mythe BridgeRiver gauge, River Severn 0.40 m Very low −0.01 m 75 km
DeerhurstRiver gauge, River Severn 0.77 m Normal ±0 78 km

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
WalcotRiver gauge, River Tern 0.39 m Normal −0.01 m 9.5 km
ShifnalRiver gauge, Wesley Brook 0.15 m Normal −0.01 m 11 km
RodingtonRiver gauge, River Roden 0.17 m Low +0.01 m 11 km
CrudgingtonRiver gauge, River Strine 0.23 m Normal −0.06 m 13 km
Boreton BridgeRiver gauge, Cound Brook 0.10 m Normal −0.02 m 13 km
Cosford RiverRiver gauge, River Worfe 0.08 m Normal −0.01 m 13 km
BurcoteRiver gauge, River Worfe 0.17 m Normal −0.01 m 14 km
BurlingtonRiver gauge, River Worfe 0.12 m Normal ±0 15 km

Questions and answers

Is the River Severn at Buildwas higher than last year?

Yes, it is 0.04 m higher than on the same day last year, when the reading was 0.55 m.

What is a normal level for the River Severn at Buildwas in mid-October?

The median for mid-October is 0.61 m. In 8 years out of 10 the reading falls between 0.43 m and 1.68 m, based on 21 years of records.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.60 m on the gauge does not mean the water is that deep.

What is the water level of Buildwas today?

On 18 Oct 2026, 02:15 BST, the water level was 0.60 m. Up 0.17 m over the last 24 hours.

Is Buildwas rising or falling?

Up 0.17 m over the last 24 hours. Down 0.18 m over the last 7 days.

Is the level of Buildwas normal?

Normal for mid-October. Compared with 21 years of daily readings for this time of year.

What is the highest water level ever recorded at Buildwas?

The highest level on record is 7.04 m on November 2, 2000. The lowest is 0.42 m on August 16, 1989.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:2134 (Agency page)
Coordinates
52.63635, -2.52496 (WGS84)
Vertical datum
station datum
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.60 m 2026-10-18 01:15 Provisional
Flow 20.6 m³/s 2026-10-18 01:00 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Buildwas (ea:2134). Accessed October 18, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/shropshire/buildwas

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.