Nivelmap
EN

Loutsenhizer Arroyo at Highway 50 near Olathe water level

River gauge, Loutsenhizer Arroyo, Colorado, United States

Directions

Right now

Normal for mid-October

Water level

2.85ft Up 0.05 ft over the last 24 hours

Flow
77.4 cfs
Water temperature
56 °F
1 3 4 5

History

History
3.03.54.04.5ftOct 16Oct 17Oct 18Oct 19Oct 213.03.54.04.5ftOct 16Oct 18Oct 21
Water level

What this means

The Loutsenhizer Arroyo at Highway 50 near Olathe is at 2.85 ft, in the normal range for mid-October.

It has risen 0.05 ft over the past 24 hours. In the last month it has stayed between 2.76 ft and 4.47 ft.

Fall is often low-water season on rivers, until steadier rain returns. The water temperature at the gauge is 56 °F.

Compared with 5 years of daily readings for this time of year. How to read levels

Floating and fishing near Loutsenhizer Arroyo at Highway 50 near Olathe

Normal flows mean predictable rapids and good access at most put-ins.

Weather at the gauge

No rain in the last 3 days.

20 Tue 68° 41° – Wind 7 mph
21 Wed 70° 46° 0.09 in, 54% Wind 10 mph
22 Thu 62° 53° 0.70 in, 89% Wind 10 mph
23 Fri 67° 49° 0.13 in, 79% Wind 20 mph
24 Sat 63° 45° 0.11 in, 31% Wind 18 mph
25 Sun 62° 44° 0.03 in, 31% Wind 10 mph
26 Mon 60° 43° – Wind 6 mph

Forecast: Open-Meteo

Sunrise 07:28 AM Sunset 06:27 PM Daylight 10 hr, 59 min Waxing gibbous 74%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Uncompahgre River at DeltaRiver gauge, Uncompahgre River 434 cfs Normal −71.0 cfs 8 mi
Gunnison River at DeltaRiver gauge, Gunnison River 1.49 ft Below flood stage +0.09 ft 8 mi
Fruit Growers Reservoir near Orchard CityReservoir, Fruit Growers Reservoir 5,465.65 ft Normal +0.05 ft 12 mi
North Fork Gunnison River above Mouth near LazearRiver gauge, North Fork Gunnison River 183 cfs Normal +16.0 cfs 12 mi
Escalante Creek near DeltaRiver gauge, Escalante Creek 7.0 cfs Normal ±0 16 mi
Leroux Creek above Mouth near HotchkissRiver gauge, Leroux Creek 6.5 cfs Very low ±0 17 mi
Surface Creek at CedaredgeRiver gauge, Surface Creek 1.03 ft Below flood stage ±0 17 mi
Gunnison River below Gunnison TunnelRiver gauge, Gunnison River 213 cfs Low ±0 21 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of Loutsenhizer Arroyo at Highway 50 near Olathe today?

On Oct 20, 2026, 09:00 PM MDT, the water level was 2.85 ft. Up 0.05 ft over the last 24 hours.

Is Loutsenhizer Arroyo at Highway 50 near Olathe rising or falling?

Up 0.05 ft over the last 24 hours.

Is the level of Loutsenhizer Arroyo at Highway 50 near Olathe normal?

Normal for mid-October. Compared with 5 years of daily readings for this time of year.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:383926107593001 (Agency page)
Coordinates
38.65721, -107.99229 (WGS84)
Vertical datum
NAVD88
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 2.85 ft 2026-10-21 03:00 Provisional
Flow 77.4 cfs 2026-10-21 03:00 Provisional
Water temperature 56 °F 2026-10-21 03:00 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: Loutsenhizer Arroyo at Highway 50 near Olathe (usgs:383926107593001). Accessed October 21, 2026 via Nivelmap, https://nivelmap.com/en/united-states/colorado/loutsenhizer-arroyo-at-highway-50-near-olathe

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.