Nivelmap
EN

Tomichi Creek at Sargents water level

River gauge, Tomichi Creek, Colorado, United States

Directions

Right now

Low for mid-October

Water level

0.88ft Up 0.04 ft over the last 24 hours

Flow
24.5 cfs
-1 0 1 3

History

History
0.840.860.88ftOct 16Oct 17Oct 18Oct 19Oct 200.840.860.88ftOct 16Oct 18Oct 20
Water level

What this means

At 0.88 ft, Tomichi Creek at Sargents is below normal for mid-October.

The water is rising: up 0.04 ft over the past 24 hours. Over the past 30 days it has moved between 0.83 ft and 0.88 ft.

Fall is often low-water season on rivers, and it usually takes a few days of steady rain to change that.

Compared with 5 years of daily readings for this time of year. How to read levels

What the stage means on the water

Low water means more dragging on shallow riffles and slower floats. Fish crowd into the deeper runs, and warm, low water stresses them, so play and release them quickly.

Weather at the gauge

No rain in the last 3 days.

20 Tue 58° 37° – Wind 11 mph
21 Wed 62° 39° – Wind 11 mph
22 Thu 50° 45° 0.41 in, 89% Wind 6 mph
23 Fri 57° 41° 0.26 in, 89% Wind 15 mph
24 Sat 55° 37° 0.20 in, 55% Wind 13 mph
25 Sun 50° 33° 0.11 in, 51% Wind 8 mph
26 Mon 50° 31° – Wind 7 mph

Forecast: Open-Meteo

Sunrise 07:20 AM Sunset 06:22 PM Daylight 11 hr, 2 min First quarter 68%

Map

Other gauges on Tomichi Creek

Gauge Level Compared with normal 24 hours Distance
Tomichi Creek at GunnisonRiver gauge, Tomichi Creek 1.44 ft Below flood stage −0.02 ft 29 mi

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Cochetopa Creek below Rock Creek near ParlinRiver gauge, Cochetopa Creek 43.9 cfs High −1.0 cfs 19 mi
Taylor River at AlmontRiver gauge, Taylor River 1.45 ft Below flood stage ±0 29 mi
East River at AlmontRiver gauge, East River 2.62 ft Below flood stage +0.03 ft 30 mi
Willow Creek above Taylor Park ReservoirRiver gauge, Willow Creek 14.3 cfs Low +0.7 cfs 30 mi
Gunnison River near GunnisonRiver gauge, Gunnison River 1.02 ft Below flood stage +0.01 ft 30 mi
Ohio Creek above Mouth near GunnisonRiver gauge, Ohio Creek 16.0 cfs Normal −0.6 cfs 31 mi
Taylor Park Reservoir at Taylor ParkReservoir, Taylor Park Reservoir 9,297.90 ft Very low +0.05 ft 31 mi
Taylor River below Taylor Park ReservoirRiver gauge, Taylor River 3.15 ft Below flood stage −0.01 ft 31 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of Tomichi Creek at Sargents today?

On Oct 20, 2026, 06:00 AM MDT, the water level was 0.88 ft. Up 0.04 ft over the last 24 hours.

Is Tomichi Creek at Sargents rising or falling?

Up 0.04 ft over the last 24 hours.

Is the level of Tomichi Creek at Sargents normal?

Low for mid-October. Compared with 5 years of daily readings for this time of year.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:09115500 (Agency page)
Coordinates
38.39503, -106.42262 (WGS84)
Vertical datum
NAVD88
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.88 ft 2026-10-20 12:00 Provisional
Flow 24.5 cfs 2026-10-20 12:00 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: Tomichi Creek at Sargents (usgs:09115500). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-states/colorado/tomichi-creek-at-sargents

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.