Nivelmap
EN

Marsh Creek at E Richards Road near Virginia water level

River gauge, Marsh Creek, Idaho, United States

Directions

Right now

Latest reading

Water level

3.25ft Steady over the last 24 hours

1 3 4 5

History

History
3.243.263.283.30ftOct 16Oct 17Oct 18Oct 20Oct 213.243.263.283.30ftOct 16Oct 18Oct 21
Water level

What this means

The U.S. Geological Survey has Marsh Creek at E Richards Road near Virginia at 3.25 ft. The agency publishes no normal range or warning level for this river yet, so there is nothing to judge the number against.

The level has held steady over the past 24 hours. The 30-day range is 3.24 ft – 3.30 ft.

Over the past seven days the change adds up to −0.05 ft.

The agency publishes no normal range for this gauge yet, so we show the trend only. How to read levels

Paddling and fishing conditions

Compare today with the chart before you go; local outfitters often know which stage suits their stretch.

Weather at the gauge

No rain in the last 3 days.

20 Tue 69° 42° – Wind 10 mph
21 Wed 72° 45° – Wind 14 mph
22 Thu 71° 50° 0.51 in, 82% Wind 11 mph
23 Fri 52° 46° 0.80 in, 94% Wind 12 mph
24 Sat 56° 42° 0.00 in, 39% Wind 6 mph
25 Sun 59° 40° – Wind 5 mph
26 Mon 60° 42° – Wind 4 mph

Forecast: Open-Meteo

Sunrise 07:50 AM Sunset 06:39 PM Daylight 10 hr, 49 min Waxing gibbous 75%

Map

Other gauges on Marsh Creek

Gauge Level Compared with normal 24 hours Distance
Marsh Creek near McCammonRiver gauge, Marsh Creek 2.54 ft Below flood stage ±0 10 mi

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Portneuf River at TopazRiver gauge, Portneuf River 2.48 ft Below flood stage +0.03 ft 11 mi
Portneuf River at PocatelloRiver gauge, Portneuf River 3.68 ft Below flood stage +0.01 ft 29 mi
Malad River at WoodruffRiver gauge, Malad River 6.4 cfs Very low −0.7 cfs 32 mi
Portneuf River near TyheeRiver gauge, Portneuf River 4.57 ft Below flood stage −0.02 ft 36 mi
Bear River at Idaho-Utah State LineRiver gauge, Bear River 9.04 ft Below flood stage −0.03 ft 36 mi
Snake River at NeeleyRiver gauge, Snake River 2.01 ft Below flood stage +0.01 ft 39 mi
American Falls ReservoirReservoir 4,313.70 ft Low 39 mi
Spring Creek at Sheepskin Road near Fort HallRiver gauge, Spring Creek 226 cfs Very low +6.0 cfs 42 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of Marsh Creek at E Richards Road near Virginia today?

On Oct 21, 2026, 12:30 AM MDT, the water level was 3.25 ft. Steady over the last 24 hours.

Is Marsh Creek at E Richards Road near Virginia rising or falling?

Steady over the last 24 hours. Down 0.05 ft over the last 7 days.

Is the level of Marsh Creek at E Richards Road near Virginia normal?

The agency publishes no normal range for this gauge yet, so we show the trend only.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:13074800 (Agency page)
Coordinates
42.48880, -112.21285 (WGS84)
Vertical datum
NAVD88
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 3.25 ft 2026-10-21 06:30 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: Marsh Creek at E Richards Road near Virginia (usgs:13074800). Accessed October 21, 2026 via Nivelmap, https://nivelmap.com/en/united-states/idaho/marsh-creek-at-e-richards-road-near-virginia

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.