Fermi Power Plant water level
Lake, Lake Erie, Michigan, United States
Right now
Below flood stage
Surface elevation
History
Not enough readings for a chart yet. History builds up with every update.
What this means
Fermi Power Plant is at 571.88 ft, in the normal range.
It is 3.35 ft below the flood stage of 575.23 ft.
In the last month it has stayed between 571.88 ft and 571.99 ft.
Lakes and reservoirs often sit lower in fall after a summer of evaporation and use, and recover with winter rain and spring snowmelt.
Judged against the official flood stage for this gauge. How to read levels
Key numbers
- Highest on record
- 576.41 ftApril 9, 1998
- Lowest on record
- 564.06 ftNovember 13, 2003
About this gauge
- Nearest town
- Stony Point (2.2 km)
Town from GeoNames (CC BY 4.0)
On the water at Fermi Power Plant
Normal levels mean few surprises on the water: ramps in use and the shoreline where you expect it.
Wear a life jacket on the water. Most boating deaths involve people who were not wearing one.
About Lake Erie
- Surface area
- 9,949 mi²
- Volume
- 404,546,486 acre-ft
- Mean depth
- 63.6 ft
- Elevation
- 564 ft
Facts from HydroLAKES (Messager et al. 2016, CC BY 4.0)
Weather at the gauge
The forecast is not available right now.
Map
Other gauges on Lake Erie
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| ToledoLake, Lake Erie | 571.90 ft | Below flood stage | 21 mi | |
| MarbleheadLake, Lake Erie | 571.77 ft | Below flood stage | 40 mi | |
| ClevelandLake, Lake Erie | 571.71 ft | Below flood stage | 88 mi |
Nearby gauges
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| GibraltarRiver gauge, Detroit River | 572.23 ft | Below flood stage | 10 mi | |
| Frank and Poet Drain at King Road at TrentonRiver gauge, Frank and Poet Drain | 1.2 cfs | Low | ±0 | 14 mi |
| River Raisin near MonroeRiver gauge, River Raisin | 221 cfs | Normal | −7.0 cfs | 14 mi |
| Muddy Creek at Belleterre Road near ErieRiver gauge, Muddy Creek | 0.3 cfs | Normal | ±0 | 14 mi |
| Canard River near LukervilleRiver gauge, Canard River | 1.56 m | Normal | −0.01 m | 30 km |
| Ecorse River at Dearborn HeightsRiver gauge, Ecorse River | 2.7 cfs | Normal | +1.7 cfs | 21 mi |
| Turkey Creek at South WindsorRiver gauge, Turkey Creek | 4.04 m | Very low | −0.06 m | 39 km |
| Lower River Rouge at DearbornRiver gauge, Lower River Rouge | 3.39 ft | Below flood stage | +0.02 ft | 24 mi |
Questions and answers
Is Fermi Power Plant really 571.88 ft deep?
No. 571.88 ft is the height of the water surface above sea level (or the agency's vertical datum), not the depth of the water.
Where is the Fermi Power Plant gauge?
The gauge is about 2.2 km from Stony Point, in Michigan.
How big is Fermi Power Plant?
It covers 9,949 mi² and holds about 404,546,486 acre-ft of water when full.
What is the water level of Fermi Power Plant today?
On Oct 21, 2026, 08:48 PM EDT, the surface elevation was 571.88 ft.
Is the level of Fermi Power Plant normal?
Below flood stage. Judged against the official flood stage for this gauge.
What is the highest water level ever recorded at Fermi Power Plant?
The highest level on record is 576.41 ft on April 9, 1998. The lowest is 564.06 ft on November 13, 2003.
How often is this data updated?
NOAA Tides & Currents (CO-OPS) publishes a new reading every 15 minutes. This page refreshes within minutes of each update.
For specialists
Station codes, datum, parameters, data quality and downloads
- Operator
- NOAA Tides & Currents (CO-OPS)
- Station code
noaa-coops:9063090(Agency page)- Coordinates
41.96000, -83.25667(WGS84)- Vertical datum
- IGLD85
- Update interval
- every 15 minutes
- Licence
- Public domain. Data: NOAA National Ocean Service, Center for Operational Oceanographic Products and Services (CO-OPS); preliminary data subject to revision
Published series
| Parameter | Last value | Time (UTC) | Quality |
|---|---|---|---|
| Surface elevation | 571.88 ft | 2026-10-22 00:48 | Provisional |
Download
Embed this gauge
Add a live card for this gauge to your website. It updates on its own and links back here.
How to cite
NOAA Tides & Currents (CO-OPS): Fermi Power Plant (noaa-coops:9063090). Accessed October 22, 2026 via Nivelmap, https://nivelmap.com/en/united-states/michigan/fermi-power-plant
How we check values
Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.
Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer