Nivelmap
EN

NB Neshaminy Creek at Chalfont water level

River gauge, NB Neshaminy Creek, Pennsylvania, United States

Directions

Right now

High for mid-October

Water level

3.01ft Up 0.07 ft over the last 24 hours

Flow
27.8 cfs
1 3 4 5

History

History
2.82.93.03.1ftOct 16Oct 17Oct 18Oct 19Oct 202.82.93.03.1ftOct 16Oct 18Oct 20
Water level

What this means

The gauge at NB Neshaminy Creek at Chalfont shows 3.01 ft, above normal for mid-October.

The water is rising: up 0.07 ft over the past 24 hours. If the rise continues, low-lying paths and riverside parking can go under water. Over the past 30 days it has moved between 2.80 ft and 3.09 ft.

That stands out in fall, when many rivers are usually near their lowest.

Compared with 5 years of daily readings for this time of year. How to read levels

What the stage means on the water

Fast, high water is not the time for casual paddling. Strainers, debris and cold water make an unplanned swim dangerous.

Weather at the gauge

No rain in the last 3 days.

20 Tue 66° 44° – Wind 12 mph
21 Wed 61° 43° – Wind 13 mph
22 Thu 66° 45° – Wind 11 mph
23 Fri 59° 45° – Wind 10 mph
24 Sat 60° 43° – Wind 5 mph
25 Sun 63° 44° – Wind 7 mph
26 Mon 66° 47° – Wind 7 mph

Forecast: Open-Meteo

Sunrise 07:17 AM Sunset 06:15 PM Daylight 10 hr, 58 min First quarter 69%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
NB Neshaminy Cr below Lake Galena near New BritainRiver gauge, NB Neshaminy Cr 62.8 cfs Very high +8.2 cfs 1.7 mi
Park Cr (SW-19) at Countyline Rd at WarminsterRiver gauge, Park Cr (SW-19) 10.1 cfs High −0.7 cfs 5.5 mi
Little Neshaminy C at Valley Road near Neshaminy PARiver gauge, Little Neshaminy C 20.7 cfs Normal −0.9 cfs 6.0 mi
East Branch Perkiomen Creek near DublinRiver gauge, East Branch Perkiomen Creek 14.5 cfs Normal ±0 8 mi
L Neshaminy Cr at Walton Road near JacksonvilleRiver gauge, L Neshaminy Cr 37.8 cfs High −1.0 cfs 9 mi
Neshaminy Creek near RushlandRiver gauge, Neshaminy Creek 75.8 cfs Normal −3.1 cfs 9 mi
Neshaminy Creek near Penns ParkRiver gauge, Neshaminy Creek 5.34 ft Below flood stage ±0 11 mi
Tohickon Creek near PipersvilleRiver gauge, Tohickon Creek 42.1 cfs Normal −2.9 cfs 11 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of NB Neshaminy Creek at Chalfont today?

On Oct 20, 2026, 10:15 AM EDT, the water level was 3.01 ft. Up 0.07 ft over the last 24 hours.

Is NB Neshaminy Creek at Chalfont rising or falling?

Up 0.07 ft over the last 24 hours.

Is the level of NB Neshaminy Creek at Chalfont normal?

High for mid-October. Compared with 5 years of daily readings for this time of year.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:01464720 (Agency page)
Coordinates
40.28816, -75.20378 (WGS84)
Vertical datum
NGVD29
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 3.01 ft 2026-10-20 14:15 Provisional
Flow 27.8 cfs 2026-10-20 14:15 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: NB Neshaminy Creek at Chalfont (usgs:01464720). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-states/pennsylvania/nb-neshaminy-creek-at-chalfont

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.