Canada
United States
Belgium
France
Ireland
Netherlands
United Kingdom
Austria
Czechia
Germany
Poland
Slovenia
Switzerland
Italy
Spain
Türkiye
Denmark
Finland
Norway
SwedenBelper LVL water level
River gauge, Derbyshire, United Kingdom
Right now
Latest reading
Water level
History
What this means
Belper LVL reads 2.06 m as of 17 Oct 2026, 22:30 BST. There is no published reference for this river yet, so we can't say whether that is high or low for the season.
It has barely moved over the past 24 hours. In the last month it has stayed between 2.05 m and 2.11 m.
Over the past seven days the change adds up to −0.01 m.
The agency publishes no normal range for this gauge yet, so we show the trend only. How to read levels
Key numbers
- Lowest and highest in 30 days
- 2.05 m – 2.11 m
Fishing and paddling
Watch the direction of travel. A rising river after rain behaves very differently from one that is dropping and clearing.
Flood alerts and warnings come from the Environment Agency.
Weather at the gauge
Rain in the last 3 days: 5.7 mm. Rain that falls upstream can take hours or days to show up at a river gauge.
Forecast: Open-Meteo
Map
Nearby gauges
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| BelperRiver gauge, Coppice Brook | 0.18 m | Normal | −0.01 m | 1.9 km |
| Smithy HousesRiver gauge, Bottle Brook | 0.28 m | Lowest on record | −0.01 m | 4.2 km |
| DuffieldRiver gauge, River Ecclesbourne | 0.15 m | Low | −0.02 m | 4.3 km |
| Wingfield ParkRiver gauge, River Amber | 0.27 m | Normal | ±0 | 5.7 km |
| Derby CityRiver gauge, River Derwent | 0.55 m | Low | ±0 | 11 km |
| Derby Bridge StreetRiver gauge, Markeaton Brook | 0.78 m | Normal | −0.04 m | 12 km |
| MatlockRiver gauge, River Derwent | 0.34 m | Very low | −0.03 m | 12 km |
| EastwoodRiver gauge, Beauvale Brook | 0.23 m | Normal | −0.02 m | 12 km |
Questions and answers
Is the river level the same as the depth of the water?
No. The reading is measured from a fixed zero mark at the gauge, so 2.06 m on the gauge does not mean the water is that deep.
What is the water level of Belper LVL today?
On 17 Oct 2026, 22:30 BST, the water level was 2.06 m. Steady over the last 24 hours.
Is Belper LVL rising or falling?
Steady over the last 24 hours. Steady over the last 7 days.
Is the level of Belper LVL normal?
The agency publishes no normal range for this gauge yet, so we show the trend only.
How often is this data updated?
The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.
Where does this data come from?
The values come directly from the Environment Agency, the official operator of this gauge, and are published under the Open Government Licence v3.0. We do not estimate or model live values.
For specialists
Station codes, datum, parameters, data quality and downloads
- Operator
- Environment Agency
- Station code
ea:4883- Coordinates
53.02938, -1.48636(WGS84)- Vertical datum
- station datum
- Update interval
- every 15 minutes
- Licence
- Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0
Published series
| Parameter | Last value | Time (UTC) | Quality |
|---|---|---|---|
| Water level | 2.06 m | 2026-10-17 21:30 | Provisional |
Download
Embed this gauge
Add a live card for this gauge to your website. It updates on its own and links back here.
How to cite
Environment Agency: Belper LVL (ea:4883). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/derbyshire/belper-lvl
How we check values
Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.
Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer