Nivelmap
EN

Big Bridge water level

River gauge, Owenmore (Sligo), Sligo, Ireland

Directions

Right now

Within the normal range

Water level

2.05m Down 0.09 m over the last 24 hours

0 1 2 3 Highest onrecord 3.21 m

History

History
2.052.102.15mOct 16Oct 16Oct 16Oct 17Oct 17Top of normal range2.052.102.15mOct 16Oct 16Oct 17Top of normal range
Water level Top of normal rangeBottom of normal range

What this means

Water levels are unremarkable at Big Bridge, where the gauge shows 2.05 m.

The usual range here runs from 0.16 m to 2.07 m.

It is still going down, by 0.09 m over the past 24 hours. The 30-day range is 2.05 m – 2.15 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.16 m – 2.07 m
Highest on record
3.21 m

For anglers and canoeists

This is an ordinary level for the river: most put-ins, beats and weirs behave as they usually do.

Many angling and canoe clubs check gauges like this one before heading out.

Weather at the gauge

Rain in the last 3 days: 20 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

17 Sat 12° -1° – Wind 7 km/h
18 Sun 12° -1° – Wind 9 km/h
19 Mon 12° -1° – Wind 17 km/h
20 Tue 14° 7° 12 mm, 50% Wind 33 km/h
21 Wed 10° 6° 3.3 mm, 49% Wind 33 km/h
22 Thu 10° 2° 1.8 mm, 69% Wind 17 km/h
23 Fri 10° 2° 2.8 mm, 75% Wind 28 km/h

Forecast: Open-Meteo

Sunrise 08:06 AM Sunset 06:34 PM Daylight 10 hr, 28 min First quarter 43%

Map

Other gauges on the Owenmore (Sligo)

Gauge Level Compared with normal 24 hours Distance
BallynacarrowRiver gauge, Owenmore (Sligo) 1.11 m Normal +0.07 m 9.7 km

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Templehouse DemesneLake, L. Templehouse 1.28 m Normal +0.10 m 7.5 km
BallynaryLake, L. Arrow 0.89 m Normal ±0 13 km
CuppanaghLake, L. Gara 1.08 m Normal +0.11 m 13 km
Billa BridgeRiver gauge, Owenbeg 0.37 m Normal −0.08 m 14 km
BallygraniaRiver gauge, Unshin 0.60 m Normal −0.46 m 14 km
LomcloonLake, L. Gara 1.30 m Normal −0.04 m 15 km
BallysadareRiver gauge 0.86 m Normal −0.09 m 17 km
Boyle Abbey BridgeRiver gauge, Boyle 0.50 m Normal +0.05 m 17 km

Questions and answers

What is the typical range for the Owenmore (Sligo) at Big Bridge?

The Office of Public Works (waterlevel.ie) gives a typical range of 0.16 m to 2.07 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 2.05 m on the gauge does not mean the water is that deep.

What is the water level of Big Bridge today?

On 17 Oct 2026, 20:30 GMT+1, the water level was 2.05 m. Down 0.09 m over the last 24 hours.

Is Big Bridge rising or falling?

Down 0.09 m over the last 24 hours.

Is the level of Big Bridge normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Big Bridge?

The highest level on record is 3.21 m.

How often is this data updated?

The Office of Public Works (waterlevel.ie) publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Office of Public Works (waterlevel.ie)
Station code
opw:35004 (Agency page)
Coordinates
54.05928, -8.51116 (WGS84)
Vertical datum
OD Malin Head OSGM15
Gauge zero
54.606 m
Update interval
every 15 minutes
Licence
CC BY 4.0. Contains Irish Public Sector Information licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence (source waterlevel.ie - provided by the Office of Public Works)

Published series

ParameterLast valueTime (UTC)Quality
Water level 2.05 m 2026-10-17 19:30 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Office of Public Works (waterlevel.ie): Big Bridge (opw:35004). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/ireland/sligo/big-bridge

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.