Nivelmap
EN

Bin Brook water level

River gauge, Cambridgeshire, United Kingdom

Directions

Right now

Within the normal range

Water level

0.17m Steady over the last 24 hours

0 1 2 Highest onrecord 2.12 m Lowest on record 0.01 m

History

History
0.160.170.170.18mOct 11Oct 13Oct 15Oct 16Oct 180.160.170.170.18mOct 11Oct 15Oct 18
0.140.160.18mSep 18Sep 26Oct 3Oct 11Oct 180.140.160.18mSep 18Oct 3Oct 18
Water level Top of normal rangeBottom of normal range

What this means

The gauge at Bin Brook reads 0.17 m, a normal level.

The usual range here runs from 0.06 m to 1.00 m.

It has barely moved over the past 24 hours. Over the past 30 days it has moved between 0.13 m and 0.19 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.06 m – 1.00 m
Lowest and highest in 30 days
0.13 m – 0.19 m
Lowest and highest in 12 months
0.13 m – 0.17 m
Highest on record
2.12 mJuly 14, 2012
Lowest on record
0.01 mMay 22, 2010

On the river at Bin Brook

A level in the typical range is usually good news for both anglers and canoeists, but conditions can change quickly after rain in the hills.

Flood warnings for the area come from the Environment Agency.

Weather at the gauge

Rain in the last 3 days: 3.0 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

18 Sun 14° 7° 3.5 mm, 91% Wind 24 km/h
19 Mon 15° 10° 3.0 mm, 96% Wind 11 km/h
20 Tue 13° 11° 9.6 mm, 53% Wind 14 km/h
21 Wed 14° 7° 4.0 mm, 51% Wind 19 km/h
22 Thu 14° 5° 0.3 mm, 33% Wind 17 km/h
23 Fri 10° 7° 32 mm, 67% Wind 32 km/h
24 Sat 11° 3° – Wind 27 km/h

Forecast: Open-Meteo

Sunrise 07:30 AM Sunset 06:01 PM Daylight 10 hr, 31 min First quarter 49%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Cambridge Jesus LockRiver gauge, River Cam 0.73 m Normal +0.02 m 2.9 km
Cambridge Byron's PoolRiver gauge, River Rhee 0.46 m Low ±0 3.0 km
GirtonRiver gauge, Washpit Brook 0.81 m Normal −0.01 m 5.2 km
CombertonRiver gauge, Bourn Brook 0.10 m Normal +0.01 m 5.2 km
Haslingfield Burnt MillRiver gauge, River Rhee 0.08 m Low ±0 5.3 km
OakingtonRiver gauge, Oakington Brook 0.04 m Low −0.01 m 6.8 km
StaplefordRiver gauge, River Granta 0.03 m Very low ±0 7.4 km
Cambridge Baits BiteRiver gauge, River Cam 0.18 m Low −0.01 m 7.5 km

Questions and answers

What is the typical range for Bin Brook?

The Environment Agency gives a typical range of 0.06 m to 1.00 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.17 m on the gauge does not mean the water is that deep.

What is the water level of Bin Brook today?

On 18 Oct 2026, 13:15 BST, the water level was 0.17 m. Steady over the last 24 hours.

Is Bin Brook rising or falling?

Steady over the last 24 hours. Steady over the last 7 days.

Is the level of Bin Brook normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Bin Brook?

The highest level on record is 2.12 m on July 14, 2012. The lowest is 0.01 m on May 22, 2010.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:E19035 (Agency page)
Coordinates
52.19723, 0.08753 (WGS84)
Vertical datum
station datum
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.17 m 2026-10-18 12:15 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Bin Brook (ea:E19035). Accessed October 18, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/cambridgeshire/bin-brook

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.