Cambridge Byron's Pool water level
River gauge, River Rhee, Cambridgeshire, United Kingdom
Right now
Below the normal range
Water level
History
What this means
Low water at Cambridge Byron's Pool: the gauge reads 0.46 m, below normal.
The usual range here runs from 0.48 m to 0.65 m.
It has barely moved over the past 24 hours. Without real rain upstream, that is unlikely to change quickly. The 30-day range is 0.44 m – 0.46 m.
Autumn rain usually starts to lift rivers again after the summer low.
Compared with the normal range the agency publishes for this gauge. How to read levels
Key numbers
- Normal range
- 0.48 m – 0.65 m
- Lowest and highest in 30 days
- 0.44 m – 0.46 m
- Lowest and highest in 12 months
- 0.44 m – 0.46 m
- Highest on record
- 1.63 mOctober 22, 2001
- Lowest on record
- 0.06 mSeptember 16, 1996
For anglers and canoeists
Low rivers are hard going for paddlers, with exposed gravel and weirs that are awkward to shoot. Salmon and sea trout usually wait for the next spate to run.
Many angling and canoe clubs check gauges like this one before heading out.
Weather at the gauge
Rain in the last 3 days: 3.5 mm. Rain that falls upstream can take hours or days to show up at a river gauge.
Forecast: Open-Meteo
Map
Other gauges on the River Rhee
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| Haslingfield Burnt MillRiver gauge, River Rhee | 0.08 m | Low | ±0 | 3.1 km |
| WimpoleRiver gauge, River Rhee | 0.08 m | Normal | ±0 | 12 km |
Nearby gauges
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| Bin BrookRiver gauge | 0.18 m | Normal | +0.01 m | 3.0 km |
| StaplefordRiver gauge, River Granta | 0.03 m | Very low | ±0 | 4.7 km |
| Cambridge Jesus LockRiver gauge, River Cam | 0.72 m | Normal | −0.01 m | 4.8 km |
| DernfordRiver gauge, River Cam | 0.08 m | Low | +0.01 m | 5.0 km |
| CombertonRiver gauge, Bourn Brook | 0.11 m | Normal | +0.01 m | 5.4 km |
| GirtonRiver gauge, Washpit Brook | 0.83 m | Normal | +0.02 m | 8.2 km |
| BabrahamRiver gauge, River Granta | 0.05 m | Very low | −0.01 m | 8.5 km |
| Cambridge Baits BiteRiver gauge, River Cam | 0.21 m | Low | +0.03 m | 9.0 km |
Questions and answers
What is the typical range for the River Rhee at Cambridge Byron's Pool?
The Environment Agency gives a typical range of 0.48 m to 0.65 m for this gauge.
Is the river level the same as the depth of the water?
No. The reading is measured from a fixed zero mark at the gauge, so 0.46 m on the gauge does not mean the water is that deep.
What is the water level of Cambridge Byron's Pool today?
On 19 Oct 2026, 12:00 BST, the water level was 0.46 m. Steady over the last 24 hours.
Is Cambridge Byron's Pool rising or falling?
Steady over the last 24 hours. Steady over the last 7 days.
Is the level of Cambridge Byron's Pool normal?
Below the normal range. Compared with the normal range the agency publishes for this gauge.
What is the highest water level ever recorded at Cambridge Byron's Pool?
The highest level on record is 1.63 m on October 22, 2001. The lowest is 0.06 m on September 16, 1996.
How often is this data updated?
The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.
For specialists
Station codes, datum, parameters, data quality and downloads
- Operator
- Environment Agency
- Station code
ea:E21732(Agency page)- Coordinates
52.17141, 0.09916(WGS84)- Vertical datum
- station datum
- Update interval
- every 15 minutes
- Licence
- Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0
Published series
| Parameter | Last value | Time (UTC) | Quality |
|---|---|---|---|
| Water level | 0.46 m | 2026-10-19 11:00 | Provisional |
Download
Embed this gauge
Add a live card for this gauge to your website. It updates on its own and links back here.
How to cite
Environment Agency: Cambridge Byron's Pool (ea:E21732). Accessed October 19, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/cambridgeshire/cambridge-byrons-pool
How we check values
Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.
Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer