Nivelmap
EN

Hessle water level

River gauge, Fleet Drain, East Riding of Yorkshire, United Kingdom

Directions

Right now

Within the normal range

Water level

1.58m Up 0.69 m over the last 24 hours

1 3 4 Highest onrecord 3.85 m Lowest on record 0.42 m

History

History
1.01.5mOct 16Oct 17Oct 18Oct 20Oct 21Bottom of normal range1.01.5mOct 16Oct 18Oct 21Bottom of normal range
Water level Top of normal rangeBottom of normal range

What this means

Fleet Drain at Hessle is at 1.58 m, within its typical range.

The usual range here runs from 0.69 m to 3.00 m.

It has risen 0.69 m over the past 24 hours. In the last month it has stayed between 0.79 m and 1.59 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.69 m – 3.00 m
Highest on record
3.85 mJuly 17, 2015
Lowest on record
0.42 mApril 2, 2001

Fishing and paddling

Paddlers and anglers can expect the river much as they know it, though a heavy shower upstream can change that within hours.

Flood alerts and warnings come from the Environment Agency.

Weather at the gauge

Rain in the last 3 days: 4.1 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

18 Sun 13° 9° – Wind 21 km/h
19 Mon 14° 12° 14 mm, 100% Wind 23 km/h
20 Tue 13° 11° 12 mm, 73% Wind 22 km/h
21 Wed 13° 7° 10 mm, 82% Wind 21 km/h
22 Thu 11° 5° 0.2 mm, 27% Wind 18 km/h
23 Fri 11° 7° 27 mm, 81% Wind 33 km/h
24 Sat 12° 5° 1.0 mm, 38% Wind 24 km/h

Forecast: Open-Meteo

Sunrise 07:40 AM Sunset 05:54 PM Daylight 10 hr, 13 min Waxing gibbous 74%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Hull Hessle Astral CloseRiver gauge, Western Drain 0.38 m Normal +0.04 m 1.5 km
Hessle Western DrainRiver gauge, Western Drain 0.09 m Normal +0.05 m 1.7 km
Barton on HumberRiver gauge, Barton Haven 0.36 m Normal ±0 3.4 km
Barrow Haven Outfall SluiceRiver gauge 1.71 m No reference yet +0.12 m 4.4 km
North Hull Birdsall AvenueRiver gauge, Setting Dyke 0.12 m Normal +0.01 m 4.9 km
North Hull National AvenueRiver gauge, Setting Dyke 0.32 m Normal +0.02 m 5.7 km
Cottingham HallgateRiver gauge, Broadlane Beck 0.08 m Normal ±0 7.0 km
Stoneferry BridgeRiver gauge, River Hull 1.64 m Normal +1.10 m 8.7 km

Questions and answers

What is the typical range for Fleet Drain at Hessle?

The Environment Agency gives a typical range of 0.69 m to 3.00 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 1.58 m on the gauge does not mean the water is that deep.

What is the water level of Hessle today?

On 21 Oct 2026, 04:00 BST, the water level was 1.58 m. Up 0.69 m over the last 24 hours.

Is Hessle rising or falling?

Up 0.69 m over the last 24 hours. Up 0.23 m over the last 7 days.

Is the level of Hessle normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Hessle?

The highest level on record is 3.85 m on July 17, 2015. The lowest is 0.42 m on April 2, 2001.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:L3211 (Agency page)
Coordinates
53.71907, -0.43409 (WGS84)
Vertical datum
station datum
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Surface elevation – – –
Water level 1.58 m 2026-10-21 03:00 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Hessle (ea:L3211). Accessed October 21, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/east-riding-of-yorkshire/hessle

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.