Nivelmap
EN

Barrow Haven Outfall Sluice water level

River gauge, Lincolnshire, United Kingdom

Directions

Right now

Latest reading

Surface elevation

1.55m Down 0.02 m over the last 24 hours

1.0 1.5 2.0

History

History
1.51.61.7mOct 12Oct 14Oct 16Oct 18Oct 191.51.61.7mOct 12Oct 16Oct 19
1.61.8mSep 19Sep 27Oct 4Oct 12Oct 191.61.8mSep 19Oct 4Oct 19
Surface elevation

What this means

Barrow Haven Outfall Sluice reads 1.55 m as of 19 Oct 2026, 19:00 BST. There is no published reference for this river yet, so we can't say whether that is high or low for the season.

It has dropped 0.02 m over the past 24 hours. In the last month it has stayed between 1.43 m and 1.80 m.

Over the past seven days the change adds up to −0.06 m.

The agency publishes no normal range for this gauge yet, so we show the trend only. How to read levels

Key numbers

Lowest and highest in 30 days
1.43 m – 1.80 m
Lowest and highest in 12 months
1.55 m – 1.63 m

Fishing and paddling

Watch the direction of travel. A rising river after rain behaves very differently from one that is dropping and clearing.

Flood alerts and warnings come from the Environment Agency.

Weather at the gauge

Rain in the last 3 days: 4.4 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

18 Sun 13° 9° 0.2 mm Wind 30 km/h
19 Mon 14° 11° 8.1 mm, 99% Wind 25 km/h
20 Tue 13° 11° 11 mm, 55% Wind 15 km/h
21 Wed 13° 7° 10 mm, 47% Wind 21 km/h
22 Thu 11° 5° 0.2 mm, 51% Wind 18 km/h
23 Fri 11° 7° 27 mm, 60% Wind 33 km/h
24 Sat 12° 5° 1.0 mm, 51% Wind 24 km/h

Forecast: Open-Meteo

Sunrise 07:36 AM Sunset 05:58 PM Daylight 10 hr, 22 min First quarter 61%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
New Holland Outfall WitsRiver gauge 0.50 m No reference yet +0.07 m 2.4 km
Barton on HumberRiver gauge, Barton Haven 0.35 m Normal ±0 3.3 km
HessleRiver gauge, Fleet Drain 0.87 m Normal +0.08 m 4.4 km
Hull Hessle Astral CloseRiver gauge, Western Drain 0.35 m Normal +0.06 m 5.5 km
Hessle Western DrainRiver gauge, Western Drain 0.06 m Normal +0.01 m 5.8 km
North Hull National AvenueRiver gauge, Setting Dyke 0.30 m Normal +0.03 m 7.9 km
North Hull Birdsall AvenueRiver gauge, Setting Dyke 0.11 m Normal +0.06 m 8.0 km
Stoneferry BridgeRiver gauge, River Hull 0.48 m Normal +0.03 m 9.6 km

Questions and answers

Is Barrow Haven Outfall Sluice really 1.55 m deep?

No. 1.55 m is the height of the water surface above sea level (or the agency's vertical datum), not the depth of the water.

What is the water level of Barrow Haven Outfall Sluice today?

On 19 Oct 2026, 19:00 BST, the surface elevation was 1.55 m. Down 0.02 m over the last 24 hours.

Is Barrow Haven Outfall Sluice rising or falling?

Down 0.02 m over the last 24 hours. Down 0.06 m over the last 7 days.

Is the level of Barrow Haven Outfall Sluice normal?

The agency publishes no normal range for this gauge yet, so we show the trend only.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the Environment Agency, the official operator of this gauge, and are published under the Open Government Licence v3.0. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:E1001
Coordinates
53.68919, -0.39054 (WGS84)
Vertical datum
ODN
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Surface elevation 1.55 m 2026-10-19 18:00 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Barrow Haven Outfall Sluice (ea:E1001). Accessed October 19, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/lincolnshire/barrow-haven-outfall-sluice

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.