Nivelmap
EN

Swalecliffe Tidal Outfall water level

River gauge, Kent, United Kingdom

Directions

Right now

Latest reading

Surface elevation

2.69m Up 0.25 m over the last 24 hours

2.5 3.0

History

History
2.42.52.62.7mOct 11Oct 13Oct 15Oct 16Oct 182.42.52.62.7mOct 11Oct 15Oct 18
2.32.52.83.0mSep 18Sep 26Oct 3Oct 11Oct 182.32.52.83.0mSep 18Oct 3Oct 18
Surface elevation

What this means

The Environment Agency has Swalecliffe Tidal Outfall at 2.69 m. There is no published reference for this river yet, so we can't say whether that is high or low for the season.

It is on the way up, by 0.25 m over the past 24 hours. The 30-day range is 2.26 m – 2.99 m.

Over the past seven days the change adds up to +0.19 m.

The agency publishes no normal range for this gauge yet, so we show the trend only. How to read levels

Key numbers

Lowest and highest in 30 days
2.26 m – 2.99 m
Lowest and highest in 12 months
2.26 m – 2.74 m

For anglers and canoeists

Without a reference range, compare today with the chart: a sharp rise usually means coloured water.

Many angling and canoe clubs check gauges like this one before heading out.

Weather at the gauge

Rain in the last 3 days: 1.3 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

18 Sun 12° 9° 34 mm, 100% Wind 34 km/h
19 Mon 14° 8° 1.4 mm, 66% Wind 14 km/h
20 Tue 14° 13° 2.1 mm, 44% Wind 21 km/h
21 Wed 15° 9° 3.7 mm, 41% Wind 36 km/h
22 Thu 15° 7° 2.6 mm, 60% Wind 32 km/h
23 Fri 14° 8° 33 mm, 82% Wind 52 km/h
24 Sat 10° 6° – Wind 37 km/h

Forecast: Open-Meteo

Sunrise 07:25 AM Sunset 05:58 PM Daylight 10 hr, 34 min First quarter 50%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Grasmere RoadRiver gauge, Swalecliffe Brook 8.17 m Normal +0.11 m 1.7 km
Whitstable RoadRiver gauge, West Brook 3.59 m Very high +0.10 m 1.9 km
Vauxhall BridgeRiver gauge, Great Stour 0.37 m Normal +0.08 m 8.2 km
Fordwich River LevelRiver gauge, Great Stour 1.40 m Normal +0.07 m 8.9 km
West Gate GardensRiver gauge, Great Stour 0.24 m Normal +0.02 m 9.5 km
Horton weirRiver gauge, Great Stour 0.17 m Normal ±0 12 km
LittlebourneRiver gauge, Little Stour 0.01 m Very low +0.01 m 12 km
BekesbourneRiver gauge, Nailbourne 0.77 m Normal ±0 13 km

Questions and answers

Is Swalecliffe Tidal Outfall really 2.69 m deep?

No. 2.69 m is the height of the water surface above sea level (or the agency's vertical datum), not the depth of the water.

What is the water level of Swalecliffe Tidal Outfall today?

On 18 Oct 2026, 15:45 BST, the surface elevation was 2.69 m. Up 0.25 m over the last 24 hours.

Is Swalecliffe Tidal Outfall rising or falling?

Up 0.25 m over the last 24 hours. Up 0.19 m over the last 7 days.

Is the level of Swalecliffe Tidal Outfall normal?

The agency publishes no normal range for this gauge yet, so we show the trend only.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the Environment Agency, the official operator of this gauge, and are published under the Open Government Licence v3.0. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:7804SE
Coordinates
51.36603, 1.06628 (WGS84)
Vertical datum
ODN
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Surface elevation 2.69 m 2026-10-18 14:45 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Swalecliffe Tidal Outfall (ea:7804SE). Accessed October 18, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/kent/swalecliffe-tidal-outfall

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.