Nivelmap
EN

Bosham Moreton Road water level

River gauge, Bosham Stream, West Sussex, United Kingdom

Directions

Right now

Within the normal range

Water level

0.23m Up 0.02 m over the last 24 hours

0.0 0.5 1.0 Highest onrecord 1.00 m Lowest on record 0.00 m

History

History
0.210.220.23mOct 16Oct 17Oct 18Oct 19Oct 200.210.220.23mOct 16Oct 18Oct 20
Water level Top of normal rangeBottom of normal range

What this means

The Bosham Stream at Bosham Moreton Road is at 0.23 m, within its typical range.

The usual range here runs from 0.02 m to 0.75 m.

It has risen 0.02 m over the past 24 hours. In the last month it has stayed between 0.20 m and 0.23 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.02 m – 0.75 m
Highest on record
1.00 mDecember 20, 2012
Lowest on record
0.00 mSeptember 25, 2013

Fishing and paddling

Paddlers and anglers can expect the river much as they know it, though a heavy shower upstream can change that within hours.

Flood alerts and warnings come from the Environment Agency.

Weather at the gauge

Rain in the last 3 days: 4.8 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

20 Tue 13° 9° 12 mm, 100% Wind 17 km/h
21 Wed 13° 9° 5.9 mm, 95% Wind 41 km/h
22 Thu 14° 6° 21 mm, 97% Wind 39 km/h
23 Fri 14° 8° 28 mm, 100% Wind 46 km/h
24 Sat 13° 8° 3.7 mm, 90% Wind 34 km/h
25 Sun 17° 13° 6.9 mm, 41% Wind 28 km/h
26 Mon 17° 12° 3.7 mm, 55% Wind 30 km/h

Forecast: Open-Meteo

Sunrise 07:35 AM Sunset 06:03 PM Daylight 10 hr, 28 min Waxing gibbous 71%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Emsworth Mill Pond SluicesRiver gauge 1.89 m Normal +0.04 m 5.8 km
WestbourneRiver gauge, River Ems 0.06 m Low +0.01 m 6.0 km
EmsworthRiver gauge, West Brook 1.86 m Normal +0.04 m 6.1 km
Chichester Tozer WayRiver gauge, River Lavant 12.66 m Very low +0.08 m 6.3 km
GraylingwellRiver gauge, River Lavant 0.02 m Normal +0.02 m 6.9 km
Crosslands DriveRiver gauge, River Lavant 0.13 m Normal +0.02 m 8.9 km
West StreetRiver gauge, River Lavant 7.07 m Normal ±0 9.2 km
Salterns PSRiver gauge −1.17 m Normal +0.01 m 13 km

Questions and answers

What is the typical range for the Bosham Stream at Bosham Moreton Road?

The Environment Agency gives a typical range of 0.02 m to 0.75 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.23 m on the gauge does not mean the water is that deep.

What is the water level of Bosham Moreton Road today?

On 20 Oct 2026, 19:30 BST, the water level was 0.23 m. Up 0.02 m over the last 24 hours.

Is Bosham Moreton Road rising or falling?

Up 0.02 m over the last 24 hours.

Is the level of Bosham Moreton Road normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Bosham Moreton Road?

The highest level on record is 1.00 m on December 20, 2012. The lowest is 0.00 m on September 25, 2013.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:E11090 (Agency page)
Coordinates
50.83132, -0.85789 (WGS84)
Vertical datum
station datum
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Surface elevation – – –
Water level 0.23 m 2026-10-20 18:30 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Bosham Moreton Road (ea:E11090). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/west-sussex/bosham-moreton-road

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.